HIGH POWER COMPETITION


M1A

The M1A is patterned after the Marine Corps Match M14 stock and is ideal for a heavy barreled, match grade service rifle. It is available without hardware in molded-in colors only. It may be completely finished with a painted exterior if all hardware is supplied by the customer. It may or may not be fitted for the steel stock liner and must be properly bedded to the customer's action before firing.

Basic Stock Price - $425.00 (includes inletting and finish of your choice)
Additional Accessories


Winchester Marksman

The Winchester Marksman is an exact copy of the original factory stock found on the Pre-64 Competition Rifle. A high, straight comb without a cheek piece allows this stock to be shot right or left-handed. This stock can also be used with Remington 700's as well as late Model 70's. The stock may come equipped with a fixed length of pull or a 3-way adjustable butt assembly as well as a handstop rail. The Marksman stock is available with or without texture on the forend and pistol grip.

Basic Stock Price - $425.00 (includes inletting and finish of your choice)
Additional Accessories

Prone

The Prone Stock was patterned after an Anschütz® 1411 Prone Rifle Stock. It can be used for smallbore using the Anschütz® or several other rimfire actions. It is most commonly used in highpower with a Remington Model 700 or a Winchester Model 70. It comes with an adjustable cheek piece and can be fitted with a 3-way adjustable butt plate as well as either a Freeland or Anschütz® type handstop rail. Available in right or left-hand.

Basic Stock Price - $425.00 (includes inletting and finish of your choice)
Additional Accessories

Baker Special

The Baker Special was designed by Billie Baker using a Winchester Marksman as a starting point. He first extended the beavertail forend to the rear and tapered it back through the receiver area to increase stiffness. He then added a drop belly so that Model 700's and Model 70's would have no difficulty holding five rounds in the magazine. It can be equipped with a vertically adjustable comb and a 3-way adjustable butt assembly as well as a handstop rail. Available in right or left-hand.

Basic Stock Price - $425.00 (includes inletting and finish of your choice)
Additional Accessories

Adjustable 40X

The Adjustable 40X is manufactured for the custom shop at Remington for use on the Competition 40XC and 40XR rifles. It comes standard with a vertically adjustable cheek pieceIt is available with either a vertically adjustable butt plate, a 3-way adjustable butt assembly and a Freeland or Anschütz® type handstop rails. Blind magazine only. Available in right-hand only.

Basic Stock Price - $425.00 (includes inletting and finish of your choice)
Additional Accessories

Modified 40X

The Modified 40X is identical to the Adjustable 40X, except for the modified forend. This is the perfect three position and national match stock. The entire cheek piece is vertically adjustable, and has a drop belly for better off-hand position, a raised forend for better prone position, and a five-round magazine capacity. The modified 40X is ideal for use with the Remington 700, 40X or 40XR, as well as the Winchester Model 70. The stock is available as a blind magazine only. Available in right-hand only.

Basic Stock Price - $425.00 (includes inletting and finish of your choice)
Additional Accessories


McMillan Fiberglass Stocks, Inc
1638 W. Knudsen Dr Suite 101
Phoenix, AZ 85027 USA
Phone 623.582-9635 - Fax 623.581-3825