light and heavy benchrest stocks

LIGHT AND HEAVY BENCHREST

The Light and Heavy Benchrest stocks are made from the same mold, with the only difference being the weight. The standard weight for the Light Varmint (sporter) is approximately 1 lbs 12 oz and the Heavy Varmint is approximately 2 lbs 6 oz.  Camouflage or marble colors will add 2 oz. We can achieve a requested weight plus or minus two ounces.

Return to the top of the page(Return to Top)

World Record GroupWorld Record Group

 

 

EDGE stock

EDGE®

At 22-24 oz., the McMillan Ultralight Benchrest EDGE LV is 1/3 lighter and much stiffer than a traditional benchrest stock. The outer shell is 100% graphite for low weight and stiffness.

The EDGE HV is made with traditional fiberglass cloth and will have a minimum weight of about 2.5 lbs. 

The EDGE's radical forend is engineered like a structural beam for extra stiffness in the vertical axis. A molded-in barrel channel increases stiffness. Oversize siderails resist torque and improve tracking in a front rest. An ultra low center of gravity improves stability. The adjustable weight system in the buttstock lets you fine tune weight and balance, but is not designed for converting from light varmint to heavy varmint. The receiver area is filled with a new, lighter but stronger material than before. The barrel channel will accommodate the largest legal benchrest contour. There is a 1/2" flat on the buttstock, which is tapered to meet the minimum angle required by both the NBRSA and the IBS. Stocks are available inletted and un-inletted. We have two molds - one for Remington style tang receivers and one for square tang receivers (Panda, Viper, Nesika, Grizzly, Hall).

 

Return to the top of the page(Return to Top)

World Record GroupWorld Record Group

 

 

EDGE HBR stock, hunter class competition

EDGE® HBR

Adapted from the EDGE benchrest stock, the EDGE HBR is specifically designed for Hunter Class competition. The forend has been narrowed to 2.238" by removing the lower rail from the EDGE stock, leaving a solid platform with 1/2" tall sidewalls. The buttstock has a 1/2" flat at the minimum required angle. Unlike the EDGE, the EDGE HBR does not incorporate a weight system and will be filled so that you can adjust the length of pull. Made of a graphite shell and newly developed lighter, stronger fill, the stock weighs in at about 22 ounces. Superior tracking and stability makes this stock the choice of top Hunter Class competitors around the country. We have two molds - one for Remington style tang receivers and one for square tang receivers (Panda, Viper, Nesika, Grizzly, Hall, etc.).

Return to the top of the page(Return to Top)

World Record GroupWorld Record Group

 

 

hunter class benchrest stock

HUNTER CLASS BENCHREST

The Hunter Class stock is identical to the standard Benchrest, except that the flares on the forend have been removed to meet the 2.250 inch requirement. In addition, a Hunter Class stock specifically designed for a Remington 700 or 40X can be ordered. The standard weight for the Hunter Class is approximately 1 lb. 12 oz.  Available in right and left hand. Recommended for a blind magazine or single shot only.

Return to the top of the page(Return to Top)

World Record GroupWorld Record Group

 

 

Tooley MBR stock

TOOLEY MBR

The Tooley MBR stock, inspired by David Tooley, has gained wide acceptance in the shooting industry and is often duplicated by other stock manufacturers. Designed for 1000 Yard Benchrest shooting, this stock is proven to enhance performance. It has an extra long 3 inch wide forend for extended tracking surface. This stock will accommodate actions or sleeves with a maximum diameter of 1.6 inches. The large straight comb buttstock was designed with the bottom running at a three degree slant to allow it to move down and away from the face under heavy recoil. This allows the rifle to track extremely well. The MBR is legal for 1000 Yard Benchrest, but not for short range 100-300 yard I.B.S. or NBRSA benchrest. The MBR has a minimum weight of about 3.75 lbs. Available in right and left hand. Recommended for a blind magazine or single shot only.

Return to the top of the page(Return to Top)

World Record GroupWorld Record Group

 

 

Anschutz BR-50 stock

ANSCHUTZ® BR-50

The Anschutz® BR-50 stock has a vertical pistol grip while the buttstock offers a high roll-over type Monte Carlo cheekpiece with a flared 3 inch forend. It was specifically designed for the 2000 series Anschutz® receivers but can be utilized for most smallbore actions.

Return to the top of the page(Return to Top)

World Record GroupWorld Record Group

 

 

McMillan BR-50 benchrest stock

McMILLAN BR-50

The McMillan BR50 is a variation of our standard benchrest stock. The 3" flare has been removed under the action so that it does not interfere with the bolt handle. The forend has been shortened for improved appearance when using 18" to 20" barrels. It can be used both right and left-handed and is primarily designed for the Anschutz® 54, CZ452 and other rimfire actions. It will not accept most centerfire actions.

Return to the top of the page(Return to Top)

World Record GroupWorld Record Group