MODIFIED 40X

The Modified 40X stock is the perfect type of stock for 3-position and National Match competitions. The entire cheekpiece is vertically adjustable, the deep belly gives a better left hand support position for off-hand shooting, and the cut-away forearm gives a much lower and more stable hold for the prone position. The deep belly area will accept an extended magazine box for a full five round capacity. This stock will work well with any Remington type action. It is recommended for a blind magazine only, and is only available in a right hand model.

BAKER SPECIAL

The Baker Special was designed by high power shooter Billie Baker using a Winchester Marksman as a starting point. He first extended the beavertail forend to the rear and tapered it back through the receiver area to increase stiffness. He then added a shallow drop belly so that Model 700's and Model 70's could have a custom long magazine box fabricated to hold five rounds in the magazine for rapid fire. It is available with a vertically adjustable comb and as a blind magazine only. It may have the 2-way or 3-way buttplate fitted and a forend rail, but will not accept the spacer system. It is ambidextrous and may be inletted for both right and left hand. It may also be inletted for the CZ550 magnum with heavy target type barrels, but requires some custom work on the rear tang of the stock.

M1A

The M1A is patterned after the Marine Corps Match M14 stock and is ideal for a heavy barreled, match grade service rifle. It is available without hardware in molded-in colors only. It may be completely finished with a painted exterior if all hardware is supplied by the customer. It must be properly bedded to the customer's action before firing.

WINCHESTER MARKSMAN

The Winchester Marksman is an exact copy of the original factory stock found on the Pre-64 Competition Rifle. A high, straight comb without a cheekpiece allows this stock to be shot right or left-handed. This stock can also be used with Remington 700's as well as late Model 70's. The stock may come equipped with a fixed length of pull or a 3-way adjustable butt assembly as well as a handstop rail. The Marksman stock has texturing on the forend and pistol grip.

PRONE

The Prone Stock was patterned after an Anschutz® 1411 Prone Rifle Stock. It is most commonly used in highpower with a Remington Model 700 or a Winchester Model 70 and is recommended for a blind magazine or single shot only. It comes with an adjustable cheekpiece and can be fitted with a 3-way adjustable butt plate as well as either a Freeland or Anschutz® type handstop rail. Available in right or left hand.

Rimfire prone

The Rimfire Prone stock follows the lines of the standard prone, but is proportioned at 7/8 scale for most rimfire rifles. As an adjustable stock, it is also suitable for anyone who prefers a trimmer grip and forend. Available in right hand only.

F-CLASS

Our F-Class stock is a breakthrough design that provides an ultra low profile, 3" wide forend to achieve the lowest possible center of gravity on a front rest, reducing gun torque. The bottom of the buttstock is perfectly parallel to the forend and has a 5/8" flat for improved performance in a rear sandbag. The adjustable cheekpiece is available with an ambidextrous or true right hand or true left hand cheekpiece. The butt will accept all McMillan tactical accessories. The generic rear tang will accept most custom actions. Minimum weight is about 4 pounds.

ANSCHUTZ® SILHOUETTE

The Anschutz® Silhouette was specifically designed for the Anschutz® 54MS action but can be adapted for other smallbore actions as well as Remington 700 actions for high power. The Anschutz® Silhouette can also be inletted to accept a heavy barreled Ruger 10/22, as is often used in the Sportsman Team Challenge competition. Available in right and left hand.

MASTER SILHOUETTE

The Master Silhouette is based on input from silhouette competitors. It offers the basic Anschutz® design but with a higher comb, a shortened forend and a more sculptured pistol grip. The generic rear tang can be inletted for most rimfire and some centerfire actions. Available in right hand only.

STC (SPORTSMAN TEAM CHALLENGE)

The STC stock is provided for this unique form of competition. It is a modified version of the Anschutz® Silhouette that will accept a Ruger 10/22. The standard inletting is for a .920" to .930" diameter barrel. It is also acceptable for metallic silhouette competition, if you would like to use a 10/22. Available in right hand only.

STC INTIMIDATOR

The STC Intimidator stock was specifically designed for the Sportsman's Team Challenge. It is the best offhand stock on the market today. Being fully adjustable with 3-way adjustable butt plate and adjustable cheekpiece, this stock will fit all shooters male and female. The uniquely designed forend allows for conventional or action type shooting. It has 3 inch deep belly for position style shooting. Available in right or left hand for Ruger 10/22 actions only.

50 HBR

The 50 HBR is another new participant of 50 Caliber Benchrest shooting. The "Heavy Gun Class" stock will weigh a minimum of 12-13 pounds. It can be used with heavy barrel contours and current receivers to make a 50 lb. rifle. The forend is 5 inches wide and 2.300 inches deep through the action area. The 50 HBR will accommodate actions or sleeves up to 2.600 inches wide. The revolutionary feature to this stock is the butt. The bottom of the butt is 2.250 inches wide and is exactly parallel to the forend. Available in right and left hand.

(Return to Top)

TAKE DOWN 50 CALIBER

The Take Down 50 Caliber is a short compact stock for most 50 caliber actions. It comes with a no-tool removable buttstock for storage and transport in a standard gun case. The forend of the stock is very short, about 15 inches from the pistol grip to the tip of the stock and is designed for bipod use only. It may be equipped with a spacer system for adjustable length of pull and adjustable saddle-type cheekpiece. Available in right and left hand.

(Return to Top)

BIG MAC

The Big Mac is actually more of a tactical stock than a benchrest stock. It has a 2.500 inch square forend which allows it to ride the bags well. It has a vertical pistol grip and a straight comb with no cheekpiece. The Big Mac was specifically designed for the McMillan action, although it can be inletted for most 50 caliber actions. Available in right and left hand. Shown with optional bipod.

(Return to Top)

50 LBR

The 50 L is designed for building rifles in the “Light Gun Class” for 50 Caliber Benchrest shooting. It is similar to the 50 HBR but the forend and the action area have  been narrowed to be the most effective the “light gun” rules will allow. The forend is 3.50” in width and the stock will accept a maximum receiver width of 2.10”. It has the same 2.250” wide flat on the bottom of the butt as the  50HBR so the same rear bag can be used on both guns. The minimum weight is 6.5 lbs and is available inletted both right and left handed.

(Return to Top)