ADJUSTABLE 40X

The Adjustable 40X is manufactured for the custom shop at Remington for use on the Competition 40XC and 40XR rifles. It comes standard with a vertically adjustable cheekpiece. It is available with either a vertically adjustable buttplate, a 3-way adjustable butt assembly, and a Freeland or Anschutz® type handstop rail. It is for a blind magazine only. Available in right hand only.

(Return to Top)

MODIFIED 40X

The Modified 40X is identical to the Adjustable 40X, except for the modified forend. This is the perfect three position and national match stock. The entire cheekpiece is vertically adjustable, and has a drop belly for better off-hand position, a raised forend for better prone position, and a deep enough belly that a custom 5 round magazine box may be fabricated and installed. The modified 40X is idea for use with the Remington 700, 40X, or 40xr, as well as the Winchester Model 70. The stock is available as a blind magazine only. Available in right hand only.

(Return to Top)

BAKER SPECIAL

The Baker Special was designed by high power shooter Billie Baker using a Winchester Marksman as a starting point. He first extended the beavertail forend to the rear and tapered it back through the receiver area to increase stiffness. He then added a shallow drop belly so that Model 700's and Model 70's could have a custom long magazine box fabricated to hold five rounds in the magazine for rapid fire. It is available with a vertically adjustable comb and as a blind magazine only. It may have the 2-way or the 3-way buttplate fitted and forend rail, but will not accept the spacer system. It is ambidextrous and may be inletted for both right and left hand. It may also be inletted for the CZ550 magnum with heavy target type barrels, but requires some custom work on the rear tang of the stock.

(Return to Top)

M1A

The M1A is patterned after the Marine Corps Match M14 stock and is ideal for a heavy barreled match grade service rifle. It is available without hardware in molded-in colors only. It may be completely finished with a painted exterior if all hardware is supplied by the customer. It must be properly bedded to the customer's action before firing.

(Return to Top)

WINCHESTER MARKSMAN

The Winchester Marksman is an exact copy of the original factory stock found on the Pre-64 Competition Rifle. A high, straight comb without a cheekpiece allows this stock to be shot right or left handed. This stock can also be used with Remington 700's as well as late Model 70's. The stock may come equipped with a fixed length of pull or a 3-way adjustable butt assembly as well as a handstop rail. The Marksman stock has texturing on the forend and pistol grip.

(Return to Top)

PRONE

The Prone Stock was patterned after an Anschutz® 1411 Prone Rifle Stock. It can be used for smallbore using the Anschutz® or several other rimfire actions. It is most commonly used in high power with a Remington Model 700 or a Winchester Model 70 and can be fitted with a 3-way adjustable butt plate as well as either a Freeland or Anschutz® type handstop rail. Available in right or left hand.

(Return to Top)

F-CLASS

Our new F-Class stock is a breakthrough design that provides an ultra low profile; 3” wide forend to achieve the lowest possible center of gravity on a front rest, reducing gun torque. The bottom of the buttstock is perfectly parallel to the forend and has a 5/8” flat for improved performance in a rear sandbag. The adjustable cheekpiece in available with an ambidextrous or true right hand or true left hand cheekpiece. The butt will accept all McMillan tactical accessories. The generic rear tang will accept most custom actions. Minimum weight is about 4 pounds.

(Return to Top)

THUMBHOLE SILHOUETTE

The Thumbhole Silhouette was designed by Richard King for use with Remington 700 actions. It has a high roll-over type monte carlo cheekpiece and a deep, platform-type belly. The stock is available as a blind magazine or single shot only and will accept barrels up to a #5 contour. Available in right hand only.

(Return to Top)

MASTER SILHOUETTE

The Master Silhouette is based on input from competitors. It offers the basic Anschutz® design but with a higher comb, a shortened forend and a more sculpted pistol grip. The generic rear tang can be inletted for most rimfire and centerfire actions.  Available in right hand only.

(Return to Top)

ANSCHUTZ® THUMBHOLE

The Anschutz® Thumbhole stock was designed for the 54:18 Repeater. This factory reproduction is one of the most popular silhouette stocks offered. It can also be used for all Anschutz® 54 actions. Available in right hand only.

(Return to Top)

ANSCHUTZ® SILHOUETTE

The Anschutz® Silhouette was specifically designed for the Anschutz® 54MS action, but can be adapted for other small bore actions as well as Remington 700 actions for high power. The Anschutz® Silhouette can be inletted to accept a heavy barreled Ruger 10/22, as is often used in the Sportsman Team Challenge competition. Available in right and left hand.

(Return to Top)

STC (SPORTSMAN TEAM CHALLENGE)

The STC stock is provided for this unique form of competition. It is a modified version of the Anschutz® Silhouette that will accept a Ruger 10/22. The standard inletting is for a .920 to .930 diameter barrel. It is also acceptable for metallic silhouette competition, if you would like to use a 10/22. Available in right hand only.

(Return to Top)

STC INTIMIDATOR

The STC Intimidator stock was specifically designed for the Chevy Truck Challenge. It is the best off-hand stock on the market today. Being fully adjustable with 3-way adjustable butt plate and adjustable cheekpiece, this stock will fit all shooters, male and female. The uniquely designed forend allows for conventional or action type shooting. It has a 3inch deep belly for position style shooing. Available in right or left hand for Ruger 10/22 actions only.

(Return to Top)

CENTER GRIP XP-100

This is an adaptation of the original plastic stock found on the XP-100. The forend has been widened to accept heavy competition barrels and includes an integral trigger guard in the design. The stock is ambidextrous and requires bedding.

(Return to Top)

50 HBR

The 50 HBR is another new participant of 50 Caliber Benchrest shooting. The “Heavy Gun Class” stock will weigh a minimum of 12-13 pounds. It can be used with heavy barrel contours and current receivers to make a 50lb  rifle. The forend is 5inches wide and 2.300 inches deep through the action area. The 50 HBR will accommodate actions or sleeves up to 2.600 inches wide. The revolutionary feature to this stock is the butt. The bottom of the butt is 2.250 inches wide and is exactly parallel to the forend. Available in right and left hand.

(Return to Top)

TAKE DOWN 50 CALIBER

The Take Down 50 Caliber is a short compact stock for most 50 caliber actions. It comes with a no-tool removable buttstock for storage and transport in a standard gun case. The forend of the stock is very short, about 15 inches from the pistol grip to the tip of the stock and is designed for bipod use only. It may be equipped with a spacer system for adjustable length of pull and adjustable saddle-type cheekpiece. Available in right and left hand.

(Return to Top)

BIG MAC

The Big Mac is actually more of a tactical stock than a benchrest stock. It has a 2.5000 inch square forend which allows it to ride the bags well. It has a vertical pistol grip and a straight comb with no cheekpiece. The Big Mac was specifically designed for the McBros action, although it can be inletted for most 50 caliber actions. Available in right and left hand.

(Return to Top)

50 LBR

The 50 L is designed for building rifles in the “Light Gun Class” for 50 Caliber Benchrest shooting. It is similar to the 50 HBR but the forend and the action area have  been narrowed to be the most effective the “light gun” rules will allow. The forend is 3.50” in width and the stock will accept a maximum receiver width of 2.10”. It has the same 2.250” wide flat on the bottom of the butt as the  50HBR so the same rear bag can be used on both guns. The minimum weight is 6.5 lbs and is available inletted both right and left handed.

(Return to Top)