Hunters EDGE® / Remington

We created this ultralight hunting stock using the technology we developed for the very popular EDGE benchrest stock. It is a slim classic style and may be inletted for any right or left hand Remington 700 or Model 7 action in BDL or blind magazine configuration. The slender forend will accept up to a factory magnum barrel contour or custom barrel similar to a #3 Douglas or smaller. This all-graphite stock comes standard with aluminum pillars, a 1/2" Pachmayr Decelerator recoil pad and two sling studs in any of our painted colors. The finished stock will weigh in at 22-24 ounces, depending on the action cutout. It is not available in molded-in camo or marble finishes in order to save weight. Though an ultralight, it is still guaranteed to handle the recoil of all magnum cartridges thru .300 Win Mag recoil level.Click for Details

Hunters Edge® / Winchester/Montana Rifle Company

By popular demand, we now offer the ultralight Hunters EDGE for Winchester 70 and Montana 1999 actions. It can be inletted for long or short, right or left-handed actions in most bottom metal configurations.

Hunters Edge® / Sako

We now have a Hunters Edge pattern for the following sako, tikka and W/by rifles: (the sako 75 series and W/by mark V's will not fit). 

AI (461)

AII (L579)

AIII (L61R)

AV

Sako Quad

Sako 85 -requires rear tang fitting, custom charge of $56 and will need the rifle sent in

91 series

A7

Tikka 595 & 695

Tikka T3

Wby Light weight

Wby Vanguard

Hunters Edge® / Savage

The Hunters EDGE can also be inletted for all older Savage centerfire actions, including long, short, left and right hand.   Click for Details

(Return to Top)

Ultralight Benchrest EDGE®

At 22-24 oz., the McMillan Ultralight Benchrest EDGE LV is 1/3 lighter and much stiffer than a traditional benchrest stock. The outer shell is 100% graphite for low weight and stiffness.

The EDGE HV is made with traditional fiberglass cloth and will have a minimum weight of about 2.5 lbs. 

The EDGE's radical forend is engineered like a structural beam for extra stiffness in the vertical axis. A molded-in barrel channel increases stiffness. Oversize siderails resist torque and improve tracking in a front rest. An ultra low center of gravity improves stability. The adjustable weight system in the buttstock lets you fine tune weight and balance, but is not designed for converting from light varmint to heavy varmint. The receiver area is filled with a new, lighter but stronger material than before. The barrel channel will accommodate the largest legal benchrest contour. There is a 1/2" flat on the buttstock, which is tapered to meet the minimum angle required by both the NBRSA and the IBS. Stocks are available inletted and un-inletted. We have two molds - one for Remington style tang receivers and one for square tang receivers (Panda, Viper, Nesika, Grizzly, Hall). Click for Details

(Return to Top)

Ultralight Benchrest EDGE® HBR

Adapted from the EDGE benchrest stock the EDGE HBR is specifically designed for Hunter Class competition. The forend has been narrowed to 2.238" by removing the lower rail from the EDGE stock, leaving a solid platform with 1/2" tall sidewalls. The buttstock has a 1/2" flat at the minimum required angle. Unlike the standard Benchrest EDGE, the EDGE HBR does not incorporate a weight system and will be filled so that you can adjust the length of pull. Made of a graphite shell and newly developed lighter, stronger fill, the stock weighs in at 22 ounces. Superior tracking and stability makes this stock the choice of top Hunter Class competitors around the country. We have two molds - one for Remington style tang receivers and one for square tang receivers (Panda, Viper, Nesika, Grizzly, Hall).

(Return to Top)