 |
| A-4™ The A-4 tactical sniper stock was originally designed for the USMC. The optional adjustable saddle type cheekpiece is comfortable and efficient. The forend is similar to the A-2 but with the bottom dropped to be parallel to the top. It has a vertical pistol grip and a butt hook for better control of the butt with the non-trigger hand. It is available with fixed length of pull or adjustable spacer system. The A-4 will accommodate all Remington 700 type and Winchester Model 70 type actions. The stock is ambidextrous and may be inletted for either right and left hand. Color shown, 50% olive 25% gray 25% black marble.
THE A4 WILL ACCEPT THE FOLLOWING ACTIONS: *straight comb and saddle cheek piece available* (if your action is not listed, please contact us and ask) Barnard P, S & PL models (rear tang sits very high in stock) Bat HR & VR Borden alpine & timberline Dakota 76 (rifle must be sent in for fitting, fees may apply) Lawton 7000, 7500, 8500 McMillan G30’s & Mcbros Montana 1999’s Nesika j, k, l, s, m, c, t, v Remington 600, 660, 700, 721, 722, 788, XP 100, XR 100, 40X, model 7 RPA Quadlite single shot Savage – all staggerfeed models (DBM must be sent in for fitting), bling mag & single shot – centerfeed blind mag and single shot models only – target 3 screw Stiller – all Remington clones Surgeon – all models Winchester -model 70’s, SPR, PBR, pre-64, pre-war clover leaf tang SPECIFICATIONS: overall length of stock: 31″ depth of action area: 1.8″ (will vary depending on action model) max diameter action: 1.5″ max diameter barrel: 1.450″ str forearm width: 1.970″ grip width: 1.9″ buttstock width: 1.6″ max L.O.P. with 1″ recoil pad: 13.5″ (spacers can be added to lengthen LOP) drop @ comb: 5/16″
|
 |
| A-3™ The A-3 is a modified lightweight version of our popular A-2 stock. It is the most widely used field sniper stock available. It is available with or without an adjustable integral cheekpiece. The forend is .312 inch shallower than the A-2 from top to bottom to provide a more stable platform while shooting off sand bags or a pedestal. The stock is also filled slightly lighter than the A-2 but retains all the features that make the A-2 such an excellent tactical stock. The A-3 is made primarily for Remington and Winchester actions and it will take barrels up to 1.350 inches in diameter. Available in right and left hand. Color shown, painted black.
THE A3 WILL ACCEPT THE FOLLOWING ACTIONS: * straight comb, saddle, integral & thumbwheel adjustable cheek pieces available * (if your action is not listed, please contact us and ask) Bat HR & VR Big Horn (rear tang will sit proud on stock 1/8″) Borden Alpine & Timberline Dakota 76 (action must be sent in for fitting, fees may apply) Defiance SA, Med, LA Lawton 7000, 7500, 8500 McBros & McMillan G30 Montana 1999 SA & LA Nesika Bay – J, K, C, S, M, CT, V models Remington – 700, mod 7, 600, 660, 721, 722, 788, xp100, xr100 Ruger MK II Sako – L61R, A-V, 591, 691, Quad Savage – staggeredfeed all models (DBM model must be sent in for fitting) – centerfeed – single shot & blind mag only – target 3 screw Stiller – all Remington clones Surgeon – all models Tikka – 65, T3 Winchester – mod 70, pre 64, pre war, SPR, PBR SPECIFICATIONS: overall length of stock: 31″ depth of action area: 1.9″ (will vary depending on action model) max diameter action: 1.5″ max diameter barrel: 1.450″ str forearm width: 1.9″ grip width: 1.8″ buttstock width: 1.560″ max L.O.P. with 1″ recoil pad: 13.5″ (spacers can be added to lengthen LOP) drop @ comb: 5/16″
|
 |
| ADJUSTABLE A3-5® This stock is a variation of our famous A-3 stock but with the addition of an A-5 type butt hook on the bottom of the butt. The flat on the bottom of the hook is about 3/4″ wide. This stock is only available with an adjustable integral cheekpiece which gives both vertical and horizontal adjustments and is available with either the standard or thumbwheel elevator system. Color shown, painted gray.
THE A3-5 WILL ACCEPT THE FOLLOWING ACTIONS: *Integral & thumbwheel cheek piece available* (if your action is not listed, please contact us and ask) Barnard P & S models (rear tang sits very high in stock) BAT HR & VR Big Horn – (rear tang will sit proud on stock about 1/8″) Borden – Alpine & Timberline Dakota 76 – (rifle must be sent in for custom fitting, fees may apply) Defiance – SA, Med & LA Lawton 7000, 7500, 8500 Mauser 98 McBros & McMillan G30’s Montana 1999 – SA & LA Nesika Bay (rem tang receivers only) Remington – 600, 660, 700, model 7, 721, 722, XP100, XR100, 40X, 788 RPA Quadlock Ruger mk II & 77’s (mk II floor plate must be sent in for fitting) Sako – Quad, 91 series, L61R, A2, AV, 85 series Savage – staggeredfeed all models (DBM model must be sent in for fitting) – centerfeed – single shot & blind mag only – target 3 screw Stiller – all Remington clones Surgeon -(all models) Templar – SA & LA Tikka 65, T3, 595, 695 Weatherby Vanguard Winchester – model 70 SA & LA, SPR, PBR, Pre-64, Pre-war clover leaf tang SPECIFICATIONS: overall length of stock: 31″ depth of action area: 1.9″ (will vary depending on action model) max diameter action: 1.5″ max diameter barrel: 1.450″ str forearm width: 1.9″ grip width: 1.8″ buttstock width: 1.560″ max L.O.P. with 1″ recoil pad: 13.5″ (spacers can be added to lengthen LOP) drop @ comb: adjustable cheek piece
|
 |
| A-2™ First of the “A” series tactical stocks, the A-2 stock was designed using input from the U.S. Marine Corps as well as the F.B.I. A vertical pistol grip and straight line, extra-high comb provide for better prone shooting as well as seated bench type shooting. The forend is tapered downward from front to rear which allows for small elevation adjustments by sliding the rifle forward when using a front sand bag. It can be equipped with either a 3-way adjustable butt assembly, an adjustable spacer system or fixed length of pull. A saddle type cheekpiece may be added for use with night vision equipment. The A-2 will fit most Remington, Winchester, FN Mauser, Sako, Browning, Ruger MKII, Savage, and Howa 1500 actions. Available in right and left hand. Color shown, urban camo.
THE A2 WILL ACCEPT THE FOLLOWING ACTIONS: *straight comb and saddle cheek piece available* (if your action is not listed, please contact us and ask) Bat HR & VR Big horn – (rear tang will sit proud on stock 1/8″) Browning A-bolt & BBR CZ 550 (not magnum) Dakota 76 (action must be sent in for fitting, fees may apply) Defiance SA, Med, LA Howa 1500 Lawton 7000, 7500, 8500 Mauser 98 Montana 1999 models Nesika Bay (rem tangs only) Remington – 700, mod 7, 600, 660, 721, 722, 788, xp100, xr100 RPA Ruger – mk II’s and 77’s (mk II floor plate must be sent in for fitting) Sako – A1, A2, L61R, AV, 591, 691, Quad Savage – staggeredfeed all models (DBM model must be sent in for fitting) – centerfeed – single shot & blind mag only – target 3 screw Shilen DGA (action must be sent in for fitting) Smith & Wesson 1500 Stiller – all Remington clones Surgeon – all models Tikka 55, 65, 595, 695, T3 Weatherby – mk V lightweight, vanguards Winchester – pre-64, model 70’s, SPR, PBR SPECIFICATIONS: overall length of stock: 31″ depth of action area: 1.870″ (will vary depending on action model) max diameter action: 1.5″ max diameter barrel: 1.5″ str forearm width: 1.970″ grip width: 1.8″ buttstock width: 1.560″ max L.O.P. with 1″ recoil pad: 13.5″ (spacers can be added to lengthen LOP) drop @ comb: 1/4″
|
|
| TPR (Tactical Precision Rifle) NEW The TPR stock was designed specifically to add to McMillan’s already broad array of tactical stocks. In addition to the adjustable options and versatility of our “A” series stocks, it also offers a pistol grip. The design evolved from a desire to create a stock that offers everything that a straight line chassis stock offers along with the enhanced accuracy and recoil reduction characteristics of a fiberglass stock. This stock is fully ambidextrous and can be inletted for most Remington 700 type actions and Savage blind magazine actions. The forearm can be inletted for most barrel contours up to a 1.350″ diameter straight contour and has enough depth for installation of a Versa-Pod bipod stud. Color shown, 50% olive 25% black 25% tan marble. SPECIFICATIONS: overall length of stock: 33.25″ depth of action area: 1.7″ max diameter action: 1.53″ max diameter barrel: 1.350″ str forearm width: 2.035″ grip width: 1.3″ buttstock width: 1.610″ max L.O.P. with 1″ recoil pad: 14.75″ (spacers can be added to lengthen LOP) drop @ comb: 1/2″ (saddle c/p available only)
|
|
| A-TH NEW The A-TH stock was created after numerous customer requests for a thumbhole stock in McMillan’s tactical line. It uses a flat square type forearm comparable to the popular A-3 but with textured grooves on the sides for a superb grip when shooting off-hand. The butt-hook also has texture and a thumb groove for enhanced grip and control when shooting off a bench or prone. The ergonomics of the pistol grip are designed to put the shooter’s hand in the most natural and comfortable position. The A-TH must be ordered with one of the integral cheekpiece options and is available in right hand only. It can be inletted for most Remington, Sako, Tikka and Savage bling magazine type actions and for barrel contours up to a 1.250″ straight blank. Color shown, tan, dk tan, olive vertical marbling.
THE A-TH WILL ACCEPT THE FOLLOWING ACTIONS: *Integral or thumbwheel cheek piece only* (if your action is not listed, please contact us and ask) BAT HR & VR Big horn (tactical model tang will sit high on stock about 1/8″) Borden rem clones Defiance Howa 1500 Interarms mk X Lawton 7000, 7500, 8500 Mauser 98 McBros & McMillan Nesika rem clones Pierce Remington – 600, 660, 700, mod 7, 721, 722, xp100, xr100, 40x 788 Sako – AIII/L61R, AV, A7, 91 series, 85 series (rear tang will sit high about 1/16″) Savage – single shot or blind mags only Stiller rem clones Surgeon – all models Tikka 55, 65, 595, 695, T3 Winchester – Mod 70, SPR, PBR, TSR, Pre 64, Pre-war clover leaf tang ($51 custom fitting fee) Vanguard SPECIFICATIONS: overall length of stock: 31.5″ depth of action area: 1.850″ (will vary depending on action model) max diameter action: 1.4″ max diameter barrel: 1.350″ str forearm width: 1.900″ grip width: 1.950″ (has palm swell) buttstock width: 1.6″ max L.O.P. with 1″ recoil pad: 14″ (spacers can be added to lengthen LOP) drop @ comb: adjustable cheek piece
|
 |
| A1-3™ This stock was designed in response to a federal agency that requested certain modifications to the M40A1 sniper stock. The A1-3 features a wider forend similar to the A-3 tactical stock. The comb has been raised to the maximum height practical and the 2″ wide forend allows for mounting a broad range of optical options, such as night vision equipment. The stock has texturing on the pistol grip with a smooth surface on the forend. This stock is not available with an adjustable cheekpiece. It is made for Remingtons and Savage blind mag type actions and is ambidextrous. Colors shown, olive, blk, tan vertical marbling.
THE A1-3 WILL ACCEPT THE FOLLOWING ACTIONS: (if your action is not listed, please contact us and ask) Bat – HR, VR Big Horn – rear tang sits high on stock Defiance – all models Nesika Bay – Remington clones Remington – 40X, mod 7, 600, 660, 700, 721, 722, 788, XP 100 Savage – blind mags only Shilen DGA Stiller – All remington clones Surgeon – all models SPECIFICATIONS: overall length of stock: 31″ depth of action area: 1.850″ (will vary depending on action model) max diameter action: 1.4″ max diameter barrel: 1.6″ str forearm width: 1.980″ grip width: 1.6″ buttstock width: 1.7″ max L.O.P. with 1″ recoil pad: 14.5″ (spacers can be added to lengthen LOP) drop @ comb: 5/16″
|
 Adjustable HTG Available with adjustable integral cheekpiece. |
| M40A-1 HTG (GENERAL PURPOSE HUNTING) The original M40A1 Marine Sniper Rifle stock was designed for a heavy barrel Remington 700. It can be used for either short or long actions, as well as ADL (blind magazine), BDL (hinged floorplate), and most detachable box magazine systems. It will take any barrel contour up to a #8. This stock can also be used for most Remington, Winchester, and Savage actions. The M40A1 is available with or without texture on the forend and pistol grip. Available in right and left hand. Color shown, forest camo.
THE HTG WILL ACCEPT THE FOLLOWING ACTIONS: (if your action is not listed, please contact us and ask) Bat – HR, VR Big Horn – rear tang sits high on stock Dakota 76 (action must be sent in for fitting, fees may apply) Defiance – all models Howa 1500 Interarms mk X Mauser 98 Montana 1999 Nesika Bay – Remington clones Remington – 40X, mod 7, 600, 660, 700, 721, 722, 788, XP 100 Ruger mk II (floor plate must be sent in for fitting) Sako – AI, AII, AIII/L61R, AV, 591, 691, A7 Savage – all models – (93 E model must be sent in for fitting) * On Adj HTG model, rifles with factory DBM or floor plates, the trigger guard sits proud about 1/16″ * Shilen DGA Stiller – All remington clones Surgeon – all models Winchester – mod 70, pre 64, SPR, PBR, TSR Vanguards SPECIFICATIONS: overall length of stock: 31.5″ depth of action area: 1.815″ (will vary depending on action model) max diameter action: 1.4″ max diameter barrel: 1.150″ str forearm width: 1.830″ grip width: 1.6″ buttstock width: 1.7″ max L.O.P. with 1″ recoil pad: 14.25″ (spacers can be added to lengthen LOP) drop @ comb: 5/8″
|
|
| McHALE The McHale stock was originally designed as a competition stock for use with a number of custom actions with thick benchrest type rear tangs. The generic rear tang area will require some fitting when used with most actions. It has a high, straight comb without a cheekpiece so the stock can be shot from either side. The belly of the stock is parallel to the top so it is best suited for a blind magazine or single shot rather than with a floorplate, which requires some taper to the belly. This stock works well with most Nesika Bay, Stolle, Hall, BAT, and other benchrest type actions which do not have the normal Remington/Winchester tapered style rear tang. It can be inletted for the CZ-550 Magnum with heavy target type barrels at some sacrifice in cosmetics. The McHale can be inletted for both right and left hand actions. It is not recommended for Remington-Winchester type actions. Color shown, 70% red 30% dk green marble.
THE MCHALE WILL ACCEPT THE FOLLOWING ACTIONS: (if your action is not listed, please contact us and ask) Barnard P, S Bat – benchrest tangs Big Horn Bruno 602 CZ 550 – standard & mag model Hall – B, M, Express Interarms mk X Lawton – all models Mauser 98 Nesika Bay – K, J, L, E Steyr SSG 69 Suhl 150
SPECIFICATIONS: overall length of stock: 31″ depth of action area: 1.9″ (will vary depending on action model) max diameter action: 1.5″ max diameter barrel: 1.5″ str forearm width: 2.075″ grip width: 1.750″ buttstock width: 1.725″ max L.O.P. with 1″ recoil pad: 13.75″ (spacers can be added to lengthen LOP) drop @ comb: 5/16″
|
|
| STEYR SSG 69 Based on the A-3 stock, this SSG 69 stock was designed specifically for the Steyr SSG 69 series of .308 tactical rifles. It can be ordered with either of the integral cheekpiece options, and with most all of our other color, finish and other hardware options such as recoil pads, spacer systems, etc. Color shown, painted black.
|
 |
| STEYR SBS Also based on the A-3 stock, this SBS stock was designed specifically for the Steyr SBS and SSG-04 .308 tactical rifles. It can be ordered with either of the integral cheekpiece options, and with most all of our other color, finish, butt systems and other hardware options. Color shown, painted black.
|
 |
| SIG 3000 Fully fitted for the SigArms 3000 .308 caliber tactical rifle, this stock comes standard with a thumbwheel adjustable cheekpiece, a spacer system on the butt, an accessory rail under the forearm, two sling studs and a textured black finish. Color shown, painted black.
|
 |
| M1A The M1A is patterned after the Marine Corps Match M14 stock and is ideal for a heavy barreled, match grade service rifle. It is available without hardware in molded-in colors and painted finishes. It must be properly bedded to the customer’s action before firing. For M14/M1A rifles only. Color shown, black, blue, white camo.
|
 |
| M2A® The M2A stock is a pistol grip M1A with a vertically adjustable saddle type cheekpiece. It is designed to be used as a long-range weapon when equipped with a scope. The adjustable cheekpiece allows the shooter to see through the scope and still maintain a desirable cheek weld. It must be bedded and is not legal for NRA Service Rifle Competition. For M14/M1A rifles only. Color shown, painted black.
|
|
| M3A® Our M3A stock was designed as an alternative to the pistol grip type M2A. It has a vertical pistol grip with a wrap-over thumb shelf and can be equipped with a vertically adjustable saddle type cheekpiece. The butt is similar in design to the A-2 stock and can be fitted with an adjustable spacer system or a fixed length of pull. The forend is slightly smaller than our Match M1A and is consequently lighter and more maneuverable. It must be bedded. It is not legal for NRA Service Rifle Competition. For M14/M1A rifles only. Color shown, painted olive.
|
|
| ADJUSTABLE M3A® This stock is a version of our standard M3A with an adjustable integral cheekpiece which allows both vertical and horizontal adjustment. It is available with either the standard clamp-bar elevator option or with the thumbwheel elevator mechanism. Color shown, woodland beige, lt tan, dk gray camo.
|
|
| MFS-14® Modular Tactical System The MFS-14 turns an M14 or M1A rifle into a compact modular tactical system. The basic stock serves as a chassis to which you can add tactical components according to the function desired. This design concept is by the request of several U.S. and foreign organizations who expressed a need for a more compact .308 caliber compact semi-automatic precision rifle. You can order the basic fiberglass stock which comes with the folding mechanism, buttstock adaptor and front ferrel separately, or complete with any of the optional components. The stock can be inletted for most M14 or M1A actions but the action lugs must be bedded before use. The buttstock adaptor will accept most of the AR-15/M-16/M-4 type buttstocks. The forearm handguard is not included, you must supply your own. All colors and finishes are available. Color shown, painted olive. Click for Details
|
|
| BAF (Bolt Action Folder) NEW The new Bolt Action Folder stock is a variation of McMillan’s MFS-14 stock redesigned to accept bolt action rifles. The pistol grip has been re-contoured to provide a more comfortable and vertical grip. The generic rear tang area allows McMillan to inlet this stock for a variety of bolt action rifles. The BAF takes actions up to 1.4″ in diameter and barrels up to 1.35″ in diameter. The stock comes in two versions, one with an extended forearm to accept either of McMillan’s forearm accessory tri-rails, and one with a shorter conventional forearm. Both stocks are for right hand rifles only and come with the folding mechanism and buttstock adaptor. This stock accepts the same options as the MFS-14. All colors and finishes are available. Colors shown, woodland camo and blk, green, tan marble. Click for Details |
