BENCHREST
Light and Heavy
EDGE
EDGE HBR
Hunter Class
Tooley MBR
Anschutz® BR-50
McMillan BR-50

McMILLAN STOCKS FOR BENCHREST SHOOTING.

TO ORDER OR
FOR HELP CALL

623 582 9635



Light and Heavy Benchrest Stock

LIGHT AND HEAVY BENCHREST:
The Light and Heavy Benchrest stocks are made from the same mold, with the only difference being the weight. A sporter class stock is generally the same as the light varmint stock. The standard weight for the light varmint and sporter stock is approximately 1lb. 12oz. and the heavy varmint is approximately 2 lbs. 6 oz. Camouflage or marble colors and graphite will add about 2oz. Both benchrest tang and Remington tang molds are available. All stocks are ambidextrous and may be used right or left hand. For blind magazine or single shot only.

The EDGE

Details


EDGE:
The EDGE is an evolutionary new design in benchrest stocks. Designed and engineered with input from top benchrest shooters from around the world, it is stiffer and more stable than any stock on the market with incomparable tracking qualities. The shell is made completely of graphite with a molded in barrel channel for increased stiffness. The receiver area is filled with a new lighter but stronger material than ever before. The barrel channel will accommodate the largest legal benchrest contour. Two vertical sidewalls increase stiffness by 30% over conventionally shaped forends. There is a 1/2" flat on the buttstock, which is tapered to meet the minimum angle required by both the NBRSA and the IBS. The buttstock includes an integral weight chamber. A weight system is available for fine tuning and balancing light varmint rifles but is not designed for converting from light varmint to heavy varmint. Stocks are available inletted and un-inletted. We have two molds - one for Remington style tang receivers and one for square tang receivers (Panda, Viper, Nesika, Grizzly, Hall, etc.).


Top of page

EDGE HBR

Details


EDGE HBR:
Adapted from the EDGE benchrest stock, the EDGE HBR is specifically designed for Hunter Class competition. The forend has been narrowed to 2.238" by removing the lower rail from the EDGE stock, leaving a solid platform with 1/2" tall sidewalls. The buttstock has a 1/2" flat at the minimum required angle. Unlike the EDGE, the EDGE HBR does not incorporate a weight system and will be filled so that you can adjust the length of pull. Made of a graphite shell and newly developed lighter, stronger fill, the stock weighs in at 22 ounces. Superior tracking and stability makes this stock the choice of top Hunter Class competitors around the country. We have two molds - one for Remington style tang receivers and one for square tang receivers (Panda, Viper, Nesika, Grizzly, Hall, etc.).


Top of page

Hunter Class

HUNTER CLASS BENCHREST:
The hunter class stock is identical to the standard benchrest, except that the flares on the forend have been removed to meet the 2.250" width requirement. The hunter class stock will weigh approximately 1lb. 12oz. Both benchrest tang and Remington tang molds are available. For blind magazine or single shot only.


Top of page

Tooley MBR

TOOLEY MBR:
The Tooley MBR stock, inspired by David Tooley, has gained wide acceptance in the shooting industry and is often duplicated by other stock manufacturers. Designed for 1000 Yard Benchrest shooting, this stock is proven to enhance performance. It has an extra long 3 inch wide forend for extended tracking surface. This stock will accommodate actions or sleeves with a maximum diameter of 1.6 inches. The large straight comb buttstock was designed with the bottom running at a three degree slant to allow it to move down and away from the face under heavy recoil. This allows the rifle to track extremely well. The MBR is legal for 1000 Yard Benchrest, but not for short range 100-300 yard I.B.S. or NBRSA benchrest. The MBR has a minimum weight of about 3.75 lbs. Available in right and left hand. Recommended for a blind magazine or single shot only.


Top of page

Anschutz BR 50

ANSCHUTZ® BR-50:
The Anschutz® BR-50 stock has a vertical pistol grip while the buttstock offers a high roll-over type monte carlo cheekpiece with a flared 3 inch forend. It was specifically designed for the 2000 series Anschutz® receivers but can be utilized for most smallbore actions.


Top of page

McMillan BR-50

McMILLAN BR 50:
The McMillan BR50 is a variation of our standard benchrest stock. The 3“ flare has been removed under the action so that it does not interfere with the bolt handle. The forend has been shortened for improved appearance when using 18“ to 20“ barrels. It can be used both right and left-handed and is primarily designed for the Anschutz® 54 and CZ452 actions.


Top of page


 HOME

    1638 West Knudsen Drive Phoenix, Arizona 85027 623-582-9635
 © Copyright 2007