COMPETITION
HIGH POWER
Adjustable 40x
Modified 40X
Baker Special
M1A
Winchester Marksman
Prone
F-Class

McMILLAN STOCKS FOR HIGH POWER RIFLES.

Because competition stocks were designed to be as accurate as possible, most of them double as tactical stocks. The Prone, Baker Special, Silhouette, Big Mac and M1A stocks have all been used in military or law enforcement applications.

TO ORDER OR
FOR HELP CALL

623 582 9635



Adjustable 40X

ADJUSTABLE 40X:
The Adjustable 40X is manufactured for the custom shop at Remington for use on the Competition 40XC and 40XR rifles. It comes standard with a vertically adjustable cheekpiece. It is available with either a vertically adjustable butt plate, a 3-way adjustable butt assembly and a Freeland or Anschutz® type handstop rail. It is for a blind magazine only. Available in right hand only.

Modified 40x

MODIFIED 40X:
The Modified 40X is identical to the Adjustable 40X, except for the modified forend. This is the perfect three position and national match stock. The entire cheekpiece is vertically adjustable, and has a drop belly for better off-hand position, a raised forend for better prone position, and a deep enough belly that a custom 5 round magazine box may be fabricated and installed. The modified 40X is ideal for use with the Remington 700, 40X or 40XR, as well as the Winchester Model 70. The stock is available as a blind magazine only. Available in right hand only.


Top of page

Baker Special

BAKER SPECIAL:
The Baker Special was designed by high power shooter Billie Baker using a Winchester Marksman as a starting point. He first extended the beavertail forend to the rear and tapered it back through the receiver area to increase stiffness. He then added a shallow drop belly so that Model 700's and Model 70's could have a custom long magazine box fabricated to hold five rounds in the magazine for rapid fire. It is available with a vertically adjustable comb and as a blind magazine only. It may have the 2-way or 3-way buttplate fitted and a forend rail, but will not accept the spacer system. It is ambidextrous and may be inletted for both right and left hand. It may also be inletted for the CZ550 magnum with heavy target type barrels, but requires some custom work on the rear tang of the stock.


Top of page

M1A

M1A:
The M1A is patterned after the Marine Corps Match M14 stock and is ideal for a heavy barreled, match grade service rifle. It is available without hardware in molded-in colors only. It may be completely finished with a painted exterior if all hardware is supplied by the customer. It must be properly bedded to the customer's action before firing.


Top of page

Winchester Marksman

WINCHESTER MARKSMAN:
The Winchester Marksman is an exact copy of the original factory stock found on the Pre-64 Competition Rifle. A high, straight comb without a cheekpiece allows this stock to be shot right or left-handed. This stock can also be used with Remington 700's as well as late Model 70's. The stock may come equipped with a fixed length of pull or a 3-way adjustable butt assembly as well as a handstop rail. The Marksman stock has texturing on the forend and pistol grip.


Top of page

Prone

PRONE:
The Prone Stock was patterned after an Anschutz® 1411 Prone Rifle Stock. It can be used for smallbore using the Anschutz® or several other rimfire actions. It is most commonly used in highpower with a Remington Model 700 or a Winchester Model 70 and is recommended for a blind magazine or single shot only. It comes with an adjustable cheekpiece and can be fitted with a 3-way adjustable butt plate as well as either a Freeland or Anschutz® type handstop rail. Available in right or left hand.


Top of page

New F-Class

NEW F-CLASS:
Our new F-Class stock is a breakthrough design that provides an ultra low profile; 3“ wide forend to achieve the lowest possible center of gravity on a front rest, reducing gun torque. The bottom of the buttstock is perfectly parallel to the forend and has a 5/8“ flat for improved performance in a rear sandbag. The adjustable cheekpiece is available with an ambidextrous or true right hand or true left hand cheekpiece. The butt will accept all McMillan tactical accessories. The generic rear tang will accept most custom actions. Minimum weight is about 4 pounds.


Top of page


 HOME

    1638 West Knudsen Drive Phoenix, Arizona 85027 623-582-9635
 © Copyright 2007