ULTRALIGHT
Hunters EDGE
EDGE Benchrest
EDGE HBR

McMILLAN ULTRALIGHT STOCKS.

TO ORDER OR
FOR HELP CALL

623 582 9635

Ultralight Hunters EDGE

Details


NEW Hunters EDGE Ultralight.
We created this new ultralight hunting stock using the technology we developed for the very popular EDGE benchrest stock. It is a slim classic style and may be inletted for any right or left hand Remington 700 or Model 7, Savage, Winchester Model 70 or Montana 1999 bolt actions in most bottom metal configurations. The slender forend will accept up to a factory magnum barrel contour or custom barrel similar to a #3 Douglas or smaller. This all-graphite stock comes standard with aluminum pillars, a 1/2" Pachmayr Decelerator recoil pad and two sling studs in any of our painted colors. The finished stock will weigh in at 21-23 ounces, depending on the action cutout. It is not available in molded-in camo or marble finishes in order to save weight. Though an ultralight, it is still guaranteed to handle the recoil of all magnum cartridges thru .338 caliber.

The EDGE

Details


ULTRALIGHT BENCHREST EDGE:
At just 22 oz., the McMillan Ultralight Benchrest EDGE is 1/3 lighter and much stiffer than a traditional benchrest stock. The outer shell is 100% graphite for low weight and stiffness. The radical forend is engineered like a structural beam for extra stiffness in the vertical axis. A molded in barrel channel increases stiffness. Oversize siderails resist torque and improve tracking in a front rest. An ultra low center of gravity improves stability. The adjustable weight system in the buttstock lets you fine tune weight and balance, but is not designed for converting from light varmint to heavy varmint. The receiver area is filled with a new lighter but stronger material than ever before. The barrel channel will accommodate the largest legal benchrest contour. There is a 1/2" flat on the buttstock, which is tapered to meet the minimum angle required by both the NBRSA and the IBS. Stocks are available inletted and un-inletted. We have two molds one for Remington style tang receivers and one for square tang receivers (Panda, Viper, Nesika, Grizzly, Hall).


Top of page

EDGE HBR

Details


ULTRALIGHT BENCHREST EDGE HBR:
Adapted from the EDGE benchrest stock the EDGE HBR is specifically designed for Hunter Class competition. The forend has been narrowed to 2.238" by removing the lower rail from the EDGE stock, leaving a solid platform with 1/2" tall sidewalls. The buttstock has a 1/2" flat at the minimum required angle. Unlike the standard Benchrest EDGE, the EDGE HBR does not incorporate a weight system and will be filled so that you can adjust the length of pull. Made of a graphite shell and newly developed lighter, stronger fill, the stock weighs in at 22 ounces. Superior tracking and stability makes this stock the choice of top Hunter Class competitors around the country. We have two molds one for Remington style tang receivers and one for square tang receivers (Panda, Viper, Nesika, Grizzly, Hall).


Top of page


 HOME

    1638 West Knudsen Drive Phoenix, Arizona 85027 623-582-9635
 © Copyright 2007