guns

Competition Stocks

 
 
 
 
Benchrest | BR 50 | 50 Caliber | Edge | Handguns | High Power | Silhouette/STC
 

H
IGH POWER COMPETITION

 
 
Quick Links
 
Additional Accessories
Price includes Installation


Presentation Pad $56.00

Decelerator Pad $76.00

Spacer System
(includes Pad) $99.00

3-way Adjustable Butt Plate (includes Pad) $154.00

Vertically Adjustable Butt Plate $99.00

Adjustable Cheek Piece $99.00

Thumbwheel Adjustable Cheek Piece $121.00

Handstop Rail anodized black $42.00

Sling Swivels studs
(per stud) $6.50

Sling Swivels and studs (each) $9.50

Flushmount Swivel cups (each) $11.00

Flushmount Swivels and cups (each) $16.00

Stock made with graphite $77.00

TOP

M1A

The M1A is patterned after the Marine Corps Match M14 stock and is ideal for a heavy barreled, match grade service rifle. It is available without hardware in molded-in colors only. It may be completely finished with a painted exterior if all hardware is supplied by the customer. It may or may not be fitted for the steel stock liner and must be properly bedded to the customer's action before firing.

Basic Stock Price - $425.00 (includes inletting and finish of your choice)

Winchester Marksman

The Winchester Marksman is an exact copy of the original factory stock found on the Pre-64 Competition Rifle. A high, straight comb without a cheek piece allows this stock to be shot right or left-handed. This stock can also be used with Remington 700's as well as late Model 70's. The stock may come equipped with a fixed length of pull or a 3-way adjustable butt assembly as well as a handstop rail. The Marksman stock is available with or without texture on the forend and pistol grip.

Basic Stock Price - $425.00 (includes inletting and finish of your choice)

Prone

The Prone Stock was patterned after an Anschütz® 1411 Prone Rifle Stock. It can be used for smallbore using the Anschütz® or several other rimfire actions. It is most commonly used in highpower with a Remington Model 700 or a Winchester Model 70. It comes with an adjustable cheek piece and can be fitted with a 3-way adjustable butt plate as well as either a Freeland or Anschütz® type handstop rail. Available in right or left-hand.

Basic Stock Price - $425.00 (includes inletting and finish of your choice)


Baker Special

The Baker Special was designed by high power shooter Billie Baker using a Winchester Marksman as a starting point. He first extended the beavertail fore-end to the rear and tapered it back through the receiver area to increase stiffness. He then added a shallow drop belly so that Model 700's and Model 70's ould have a custom long magazine box fabricated to hold five rounds in the magazine for rapid fire. It is only available with a vertically adjustable comb. It may have the 2-way or 3-way buttplate fitted, and a fore-end rail but will not accept the spacer system. It is ambidextrous and may be inletted for both right and left hand. May also be inletted for the CZ-550 magnum with heavy target type barrels but requires some custom work on the rear tang of the stock.

Basic Stock Price - $425.00 (includes inletting and finish of your choice)


Adjustable 40X

The Adjustable 40X is manufactured for the custom shop at Remington for use on the Competition 40XC and 40XR rifles. It comes standard with a vertically adjustable cheek pieceIt is available with either a vertically adjustable butt plate, a 3-way adjustable butt assembly and a Freeland or Anschütz® type handstop rails. Blind magazine only. Available in right-hand only.

Basic Stock Price - $425.00 (includes inletting and finish of your choice)


Modified 40X

The Modified 40X is identical to the Adjustable 40X, except for the modified forend. This is the perfect three position and national match stock. The entire cheek piece is vertically adjustable, and has a drop belly for better off-hand position, a raised forend for better prone position, and a five-round magazine capacity. The modified 40X is ideal for use with the Remington 700, 40X or 40XR, as well as the Winchester Model 70. The stock is available as a blind magazine only. Available in right-hand only.

Basic Stock Price - $425.00 (includes inletting and finish of your choice)


TOP

1638 W. Knudsen Dr. Suite 101, Phoenix, AZ 85027 USA
telephone:623.582.9635 fax: 623-581-3825 - Email: info@mcmfamily.com

Copyright © 2003 McMillan Fiberglass Stocks, Inc.
All Rights Reserved.
 
Custom Rifle Stocks Remingtion rifles Winchester Rifles McMillan Fi berglass Stocks mcmillan rifles rifle and gun stocks hunting and sporting rifle stocks A5 file stocks tactical stocks competition stocks Hunting and sporting rifle stocks McMillan link exchange Order your McMillan Stocks